- 序列:{Y(SO3H)}-I-{Y(SO3H)}-TQ
- 分子式:C33H46N6O16S2
相关文档
批次之间数据可能略有差异
产品详情
-
产品名称
Phytosulfokine (PSK) alpha 多肽
-
序列
{Y(SO3H)}-I-{Y(SO3H)}-TQ
-
三字母序列
H-Tyr(SO3H)-Ile-Tyr(SO3H)-Thr-Gln-OH
-
长度 (aa)
5
-
多肽纯度 (HPLC, %)
95.08
-
分子式
C33H46N6O16S2
-
分子量(Da)
846.76
-
CAS No.
179667-62-0
-
来源
固相合成
-
描述
Phytosulfokine-alpha (PSK-α) is a sulfated pentapeptide with the structure H-Tyr(SO3H)-Ile-Tyr(SO3H)-Thr-Gln-OH. It was first isolated from conditioned medium of Asparagus officinalis mesophyll cell cultures, where it functions as a mitogenic factor promoting cell proliferation in low-density plant cell cultures. The biological activity of PSK-α is strictly dependent on the sulfation of its tyrosine residues, as the unsulfated peptide analog shows no mitogenic activity.
PSK-α exhibits high potency with an ED50 of 3.8 × 10-9 M in asparagus mesophyll cell bioassays. This disulfated peptide represents the first chemically characterized peptidal growth factor in higher plants and demonstrates that peptide-based signaling molecules, similar to those found in animal systems, also play crucial roles in plant cell communication and proliferation regulation.
Note: TFA-removed form of this peptide is not available, as the sulfonate group tends to detach during TFA removal.
-
储存指南
一般情况下, Phytosulfokine (PSK) alpha 多肽 粉末应该保存在-20甚至-70摄氏度. Phytosulfokine (PSK) alpha 多肽 溶解后应该-70摄氏度分装保存,避免反复冻融. 了解更多细节,请查阅手册:多肽溶解及保存指南
-
参考文献
- Matsubayashi Y, Sakagami Y. Phytosulfokine, sulfated peptides that induce the proliferation of single mesophyll cells of Asparagus officinalis L. Proc Natl Acad Sci USA. 1996;93(15):7623-7.
-
关于三氟乙酸盐
三氟乙酸(Trifluoroacetic acid,简称 TFA)是高效液相色谱(简称 HPLC)纯化过程中常用的反离子。TFA 的存在可能会对肽的净重量、外观及溶解度产生影响,具体如下:
对净重量的影响:TFA 盐会增加产物的总质量。在大多数情况下,肽的含量占总重量的 80% 以上,剩余部分则为 TFA。
对溶解度的影响:TFA 盐通常能提高肽在水溶液中的溶解度。
在生物检测中的影响:对于大多数标准的体外检测,残留的 TFA 水平一般不会造成干扰。但需注意,在高灵敏度的细胞研究或生化研究中,需关注其存在可能带来的影响。
-
关于多肽净含量
干品多肽的重量中不仅仅包含多肽,还包含有一些非肽的组份,如水、被吸收的溶剂、配位离子和盐等。肽的净含量是指肽在其中的重量百分比,这个百分比的数值范围很大,可能从50%到90%,取决于纯度、序列以及合成和纯化的方法,不要将肽的净含量和肽的纯度混为一谈,他们是两个完全不同的概念。纯度通常是通过HPLC测定的。纯度定义的是多肽样品中含正确序列的组分的百分比,而肽的净含量是指样品中肽类物质相对于总物质所占的百分比,肽的净含量通常是氨基酸组分分析或紫外分光法测定的,这个信息主要是在一些对肽的浓度很敏感的实验中,对计算肽的浓度是很重要的。
-
摩尔浓度计算器
-
稀释计算器
-
百分比浓度计算器
质量 (g) = 浓度 (mol/L) × 体积 (L) × 分子量 (g/mol)
相关服务
多肽合成服务: 纽普生物(NovoPro)提供常规多肽合成、糖修饰多肽合成、稳定同位素标记的多肽合成、磷酸化多肽合成、荧光标记多肽、多肽的BSA/KLH/OVA等载体蛋白的偶联等服务。